Method: Turn on the hood switch first, then lift the hood, and finally hold the hood with the brace. The specific method is as follows: find the hood switch in the lower left corner of the cab, which is generally in these two positions in the figure. The hood will make a rattling sound when it is turned on. Lift the hood gently with your hands.
Specific steps: (1) First open the door, sit in the driver's seat, and then find the engine switch handle on the left side of the driver's seat. ( 2) Pull the handle of the car engine with your hand and hear a bang. ( 3) Check whether the hood of the car is open. If there is an obvious gap, it means that the hood of the car has been opened.
First, open the door, sit in the driver's seat, and then find the engine switch handle on the left side of the driver's seat. Pull the handle of the car engine with your hand when you hear a bang. Check whether the hood of the car engine is open. If there is already an obvious gap, it means that the hood of the car engine has been opened.
The front hood of the car can be opened by finding the switch position according to different models. Basically, the hood switch of all vehicles is located on the left panel of the central console. Some models are designed lower, located in the lower left corner, and closer to the left foot. No matter where the switch is, as long as we recognize the sign of the hood switch.
The handle switch only needs to be pulled up; the button switch only needs to be pressed. After completing the first step, the hood of the car will bounce up slightly, revealing a gap of about 3-5 cm.At this time, the hood has not been fully opened, and there is also a safety buckle under the middle of the hood.
[Pacific Automobile Network] Find the hood switch in the lower left corner of the cab. When you turn it on, the hood will make a sound. Lift it gently with your hand to open the hood.
1. The main car finds the power switch of the hood. Generally, on the left panel of the driver's seat, it may be a power switch pulled by hand or foot. The owner can open the hood by pulling or stepping on the power switch with his hand. After the owner presses or steps on the power switch, the hood of the car will be lifted up, leaving a gap of about 3-5 centimeters.
2. Hand-pull switch Generally speaking, this switch is in the lower left corner of the driver's seat.You only need to pull the switch up, and the front cover of the car will open, which is very simple. Button-type switch This kind of switch is generally on the panel on the left side of the central console. You only need to press the button, and the front cover will bounce up slightly.
3. At the bottom left of the central console of the vehicle, above the clutch pedal, on the edge of the black plastic plate, there is a long strip of small wrench. Hold it by hand and gently pull it back. After clicking, you can go to the front to open the engine cover. The sales consultant who sold your car failed in business ability.
First of all, open the door, sit in the driver's seat, and then find the engine switch handle on the left side of the driver's seat. Pull the handle of the car engine with your hand when you hear a bang.Check whether the hood of the car engine is open. If there is already an obvious gap, it means that the hood of the car engine has been opened.
After opening the engine hatch, take out the engine hatch support rod and put one end of the engine support rod into the support slot to support the engine hatch. If the hood is equipped with hydraulic support, there is no need to manually support the hood.
At the bottom left of the central console of the vehicle, above the clutch pedal, and on the edge of the black plastic plate, there is a long strip of small wrench. Hold it in your hand and gently pull it back. After clicking, you can go to the front to open the engine cover. The sales consultant who sold your car failed in business ability.
The way to turn on the hood of the car is: you need to pull up the handle switch hard; press the button switch;After the first two steps are completed, the hood of the car will bounce up slightly, revealing a gap of about 3-5 cm. The details are as follows: At this time, the hood is not fully opened, and there is a safety buckle under the middle of the hood.
Binance wallet-APP, download it now, new users will receive a novice gift pack.
Method: Turn on the hood switch first, then lift the hood, and finally hold the hood with the brace. The specific method is as follows: find the hood switch in the lower left corner of the cab, which is generally in these two positions in the figure. The hood will make a rattling sound when it is turned on. Lift the hood gently with your hands.
Specific steps: (1) First open the door, sit in the driver's seat, and then find the engine switch handle on the left side of the driver's seat. ( 2) Pull the handle of the car engine with your hand and hear a bang. ( 3) Check whether the hood of the car is open. If there is an obvious gap, it means that the hood of the car has been opened.
First, open the door, sit in the driver's seat, and then find the engine switch handle on the left side of the driver's seat. Pull the handle of the car engine with your hand when you hear a bang. Check whether the hood of the car engine is open. If there is already an obvious gap, it means that the hood of the car engine has been opened.
The front hood of the car can be opened by finding the switch position according to different models. Basically, the hood switch of all vehicles is located on the left panel of the central console. Some models are designed lower, located in the lower left corner, and closer to the left foot. No matter where the switch is, as long as we recognize the sign of the hood switch.
The handle switch only needs to be pulled up; the button switch only needs to be pressed. After completing the first step, the hood of the car will bounce up slightly, revealing a gap of about 3-5 cm.At this time, the hood has not been fully opened, and there is also a safety buckle under the middle of the hood.
[Pacific Automobile Network] Find the hood switch in the lower left corner of the cab. When you turn it on, the hood will make a sound. Lift it gently with your hand to open the hood.
1. The main car finds the power switch of the hood. Generally, on the left panel of the driver's seat, it may be a power switch pulled by hand or foot. The owner can open the hood by pulling or stepping on the power switch with his hand. After the owner presses or steps on the power switch, the hood of the car will be lifted up, leaving a gap of about 3-5 centimeters.
2. Hand-pull switch Generally speaking, this switch is in the lower left corner of the driver's seat.You only need to pull the switch up, and the front cover of the car will open, which is very simple. Button-type switch This kind of switch is generally on the panel on the left side of the central console. You only need to press the button, and the front cover will bounce up slightly.
3. At the bottom left of the central console of the vehicle, above the clutch pedal, on the edge of the black plastic plate, there is a long strip of small wrench. Hold it by hand and gently pull it back. After clicking, you can go to the front to open the engine cover. The sales consultant who sold your car failed in business ability.
First of all, open the door, sit in the driver's seat, and then find the engine switch handle on the left side of the driver's seat. Pull the handle of the car engine with your hand when you hear a bang.Check whether the hood of the car engine is open. If there is already an obvious gap, it means that the hood of the car engine has been opened.
After opening the engine hatch, take out the engine hatch support rod and put one end of the engine support rod into the support slot to support the engine hatch. If the hood is equipped with hydraulic support, there is no need to manually support the hood.
At the bottom left of the central console of the vehicle, above the clutch pedal, and on the edge of the black plastic plate, there is a long strip of small wrench. Hold it in your hand and gently pull it back. After clicking, you can go to the front to open the engine cover. The sales consultant who sold your car failed in business ability.
The way to turn on the hood of the car is: you need to pull up the handle switch hard; press the button switch;After the first two steps are completed, the hood of the car will bounce up slightly, revealing a gap of about 3-5 cm. The details are as follows: At this time, the hood is not fully opened, and there is a safety buckle under the middle of the hood.
Binance Download for PC Windows 10
author: 2025-02-01 00:50111.84MB
Check896.16MB
Check436.78MB
Check625.81MB
Check738.42MB
Check656.46MB
Check224.92MB
Check446.36MB
Check671.35MB
Check989.27MB
Check463.21MB
Check619.78MB
Check299.48MB
Check146.24MB
Check831.35MB
Check761.47MB
Check669.24MB
Check829.94MB
Check884.74MB
Check567.55MB
Check998.41MB
Check854.73MB
Check527.38MB
Check415.69MB
Check183.64MB
Check244.41MB
Check484.63MB
Check523.84MB
Check222.92MB
Check512.15MB
Check253.44MB
Check535.14MB
Check826.23MB
Check367.68MB
Check562.87MB
Check799.87MB
CheckScan to install
Binance wallet to discover more
Netizen comments More
588 左图右史网
2025-02-01 01:40 recommend
2380 辉光日新网
2025-02-01 01:19 recommend
1535 纵虎出柙网
2025-02-01 00:51 recommend
1366 拿云攫石网
2025-02-01 00:26 recommend
2520 一鞭一条痕网
2025-01-31 23:54 recommend